How To Replace a Toilet

3/2/2022 (Permalink)

Over time, a leaking toilet can cause problems and require help from a water damage specialist.

What Is The Best Way To Replace A Toilet?

Over time, a leaking toilet can cause problems and require help from a water damage specialist. Sometimes you can remedy the situation by replacing a faulty component. However, if your toilet repair is unsuccessful, replacing the entire unit may be your only option. Although the task may seem intimidating, the process is typically straightforward. Following a few essential guidelines can help you successfully accomplish this home improvement project.

Measure Before You Begin

Before installing a different commode, you should verify that the new device can fit into the allocated space. To accomplish this, complete a few important measurements:

• Distance from the back wall to the floor bolts
  
• Space between the current bowl and side walls
  
• Distance from the tank to water supply lines

Remove Existing Toilet

Disconnecting a leaking toilet can be messy. To minimize water seepage, you should complete the following steps:

• Turn off the water supply
  
• Flush commode to remove fluid
  
• Absorb remaining liquid with a sponge
  
• Place a bucket under tank before removing supply line

To disassemble your old toilet, unscrew the tank from the bowl. Then, loosen and remove the nuts holding the unit to the floor and place the detached commode on a garbage bag. You should also remove the old wax ring and any excess wax remaining along the top of the drain.

Set up New Toilet

Before connecting your new unit, you should install new floor bolts and place a new wax ring on the base of the toilet outlet. Then, lower the bowl over the new bolts, pushing it straight down to prevent ring damage. Once the base is firmly in place, secure the nuts. To prevent cracks, avoid overtightening.

After installing the base, carefully attach the tank. You should ensure the unit is level, and then reconnect the water supply. Before finalizing the project, verify the absence of leaks and adjust components as necessary.
A Simple Project

Replacing an old, leaking toilet with a new model doesn’t have to be a hassle. Measuring before commencing the project and taking steps to minimize water seepage can help every homeowner in Van Nuys South, CA, efficiently accomplish the task.